Troubleshooting Case & Carton Failures: “Chewing Gum Failure”

Apr 6, 2016 Off Comments in Packaging by
Troubleshooting Case & Carton Failures: “Chewing Gum Failure”

You’re wearing a brand new pair of shoes when you step on a wad of chewing gum. You can feel the gum stretching up from the ground as you lift your foot, revealing a stringy mess. Isn’t it the worst?

In the world of packaging, industrial adhesives can behave in a similar way, which we refer to as “chewing gum failure.” If you’re seeing pop-opens in your plant, there’s a possibility it could be a chewing gum failure. Like chewing gum, the adhesive appears stringy and is visible on both sides of the substrate.   

What Causes “Chewing Gum Failure?”

There are a few reasons this type of case and carton failure might occur:

  1. The adhesive is too hot
  2. There’s too much adhesive
  3. The adhesive is too slow

Troubleshooting Case & Carton Failures- Industrial Adhesive Chewing Gum Failure


To resolve this issue, you can try the following:

  1. Decrease the running temperature
  2. Reduce the bead width
  3. Seek a faster setting adhesive

There are a number of adhesive-related issues that can cause packaging to fail, so we always recommend you work with your industrial adhesive supplier to identify the issue. For more information, contact us at 1-800-844-1740 or us the contact form below. Our adhesive experts are available 24/7 to provide technical support.